BASIX (Building and Sustainability Index) is referred to as an assessment tool for measuring sustainability associated with residential buildings within NSW.
The aim is to reduce the adverse environmental impacts caused by the new homes and encourage the builders to meet at least the minimum sustainability standards.
BASIX helps promote better thermal performance, water efficiency and proper energy utilisation. Beyond that, it also reports on the type of construction materials required for constructing a property, based on which the embodied energy is then calculated.
A BASIX certificate requirements are applied to all the NSW residential dwellings and are a key utilisation parameter for fulfilling the net-zero emission goal that’s set to be achieved by 2050.
As of today, the BASIX requirements are considered an integral part of the overall residential property development process.
If you are about to construct a property anytime soon in Australia, you might need to be aware of what BASIX is and what some of the sustainability updates on it are for you to adopt. Read along this article till the end to find out!
What is the Significance of the BASIX Certificate?
BASIX is the concept that the NSW government introduced in order to ensure that the homes being constructed are designed in a manner such that:
- They use a lower amount of potable water.
- They are responsible for lowering the greenhouse gas emissions
- Adopt the set targets associated with water or energy reduction for specific units or dwellings.
A BASIX certification is a mandatory requirement for all new residential developments, and complying with the rules is of utmost necessity. Some of the types of properties that would need BASIX report before the construction work is approved are:
- Dwellings for single or dual occupancy
- Townhouses
- Villas
- Multi-unit or unit developments
- Residential alterations worth $50,000 or more.
- Construction of outdoor spas or swimming pools with water capacity demands of 40,000 litres or more.
Upon obtaining a BASIX report and certificate, you can ensure that the new residential property that you are about to construct has passed the government’s policy on reducing the over usage of energy and water in your house.
It also means that you will be saving a lot of money on your utility bills.
BASIX in NSW is the first ever conduct that is proposed in Australia for implementing strong sustainability efforts.
It has been in existence since 2004 and has been helping the nation improve its sustainability quotient around residential developments.
As of 1st October 2023, new standards were proposed for BASIX that align with the NCC (National Construction Code) of 2022. This alignment is mostly in the energy and water efficiency domain.
What Changes Have SEPP Proposed With Respect to the Use of BASIX for Residential Construction?
As of 1st October 2023, SEPP (State Environmental Planning Policy) was implemented and is considered the key initiative for the NSW government to achieve the zero emissions goal by the year 2050.
The entire industry had enough time to implement the clauses of this policy, as the draft was made available back in 2022, with the commencement date as 1st October 2023.
Some of the legislative changes that SEPP has proposed in accordance with BASIX for residential property construction are:
- The BASIX standards will be updated and incorporated for all forms of residential developments.
- Sustainability provisions will be implemented, even for some of the non-residential developments.
- Introduce specific requirements for the residential or non-residential developments for calculating and reporting embodied emissions associated with different construction materials.
Since 1st October, the BASIX standards are now being implemented through SEPP, and they will be applicable for almost all types of residential dwellings or properties, as stated in the prior section. To give you a general perspective, any house construction or renovation project that crosses the budget of $50,000 will need the BASIX certificate for an approved approach.
Some of the other changes made to the BASIX standards in accordance with SEPP are:
- SEPP has updated the thermal and energy performance standards set by BASIX. In accordance with the change, the set standard for thermal performance is now improved from the average 5.5 to 6 or 7 NatHERS rating.
- The improved standards on energy efficiency are also promoting an increase of 7-11% in the reduction of greenhouse gas emissions.
Such changes made to the BASIX standards by SEPP are applicable to almost all residential property constructions, except the homes that are in specific climatic zones, such as NSW’s North Coast, or apartment buildings with up to 5-storeys.
Furthermore, SEPP didn’t bring up any changes associated with the water standards for the residential constructions.
All the homebuyers who signed a development contract for constructing a duplex or house before 1st October 2023 are allowed to use the prior BASIX standards without the need to invoke the new standards.
For professional assistance, you can always connect with reputed BASIX consultants.
The tool is also set to experience an update, and a materials indexing feature is being added for people to be able to measure the embodied emissions.
It means the property developers will now have to measure the amount of greenhouse gas being generated during the transport or production of various construction materials.
How these Increased BASIX Standards will Help the Common Residents?
BASIX standards are now revamped, and it would make your homes a bit more comfortable than it was in the past. It is because your reliance on the cooling or heating technology will be reduced.
This initiative of obtaining BASIX certification before constructing a residential property is implemented to scale the current sustainability standards, especially for new developments.
Take the help of the BASIX consultants and let them help you cope to meet the higher standards set by SEPP. From a perspective, you must know that adopting these higher standards would help you save around $1070 every year on your energy bills.
There are a lot of other benefits that might not be directed to you personally but to the environment as a whole.
Therefore, take the help of some of the industry experts and prepare a design for your new home that would meet the new BASIX standards and promote more sustainability than what is currently being implemented.
Bottom Line
As per the statistics are concerned, so far, BASIX has helped prevent greenhouse gas emissions, measured at around 12.3 million tonnes. The updated standards by SEPP are expected to save more than 150,000 tonnes of these emissions every year.
You would definitely be saving a lot of money in the long run, but meeting the updated BASIX certificate standards might come at some upfront cost, which is worth the value.
Take the help of professionals to help you get a proper report using the BASIX standards and guide you with an efficient design to meet them.